VQC25 Cups

VQC25 Cups

VQC25 Cups

25 kg vacuum gripper with dual vacuum channels

vaQgrip VQC25 Cups is a lightweight, 25 kg vacuum gripper for palletizing cartons, cases and trays. Its two independently controlled vacuum channels accommodate different box sizes without mechanical adjustments. Built on Dock 120, it integrates vacuum generation and control with just one air line and one I/O cable.

Key Features

  • Adapts to different carton sizes

  • Independently controlled picking zones

  • Integrated vacuum generation and control

  • Adjustable vacuum sensors per channel

  • Internal air routing reduces external tubing

  • Built-in air blow-off for fast product release

25 kg payload

High-payload material handling and palletizing

1.4 kg weight

Lightweight, maximize robot payload utilization

2 vacuum channels

Independent control of two picking zones

Integrated Dock 120

Integrated vacuum generation and control

Scroll to view product

Different box sizes. One gripper.

Different box sizes. One gripper.

Different box sizes. One gripper.

VQC25 Cups uses two independently controlled vacuum channels across its 12-cup layout. Each channel controls a different picking zone, so one zone or both can be activated depending on the product. The four outer cups provide a wider gripping footprint for larger, lightweight boxes, while the eight inner cups concentrate vacuum in the centre for smaller cartons. Both zones can be activated together for larger or heavier boxes that require the full gripping area.

This allows the same gripper to handle a broader range of rigid cases, cartons and trays without changing the tool. The Dock 120 integrated vacuum generator, internal solenoid valves and adjustable vacuum sensors provide vacuum generation, control and feedback for each channel, while built-in air blow-off supports fast, clean product release. The result is a complete, ready-to-install vacuum gripper for palletizing and material handling.

Robot Compatibility

Robot Compatibility

Robot Compatibility

vaQgrip VQC25 Cups integrates with Universal Robots and FANUC CRX robots through dedicated URCap and FANUC plugin interfaces, providing direct control of the vacuum system from the robot controller.

VQC25 Cups supports the industry-standard Modbus RTU (RS-485) communication protocol, alongside Digital I/O. This allows integration with a wide range of robots, cobots, gantries and custom-designed machines using compatible control interfaces.

Standard RS-485 protocol converters can also be used to interface with communication networks such as TCP/IP and IO-Link, enabling control of the vacuum system through the preferred robot or PLC environment.

COMPATIBLE WITH ANY ROBOT BRAND

COMPATIBLE WITH ANY ROBOT BRAND